DEWALT 60V Cordless 12in Sliding Miter Saw Kit – Model DCS781X1

DEWALT 60V 12in Sliding Miter Saw Kit

4.5/5

Manufacturer: DEWALT
Model number: DCS781X1
Price: $849.00
Power source: 60V Lithium Ion
Weight: 50.9 LBs

The DCS781 is DEWALT’s 2nd generation FLEXVOLT cordless miter saw. This GEN 2 has three big upgrades to cover. First, this saw now runs off just one 60v battery, whereas the first generation saw used two. Secondly, this saw has new Regenerative Braking Technology. Lastly, DEWALT claims it will deliver 20% more power than other cordless saws.

Features & Specs

Out of the Box | Square

Most saws, not all, require the user to “dial in” the precision out of the box. Squaring the saw  90° up and down and 90° to the fence required no adjustments on this miter saw once removed from the box. The robust packaging appears to have kept the saw well calibrated during transit.

Kit Components

The DEWALT DCS781 can be sold either as a bare tool (DCS781B) or as a kit (DCS781X1) The kit contains the following items:

• DEWALT 12″ 60V Sliding Miter Saw (DCS781B)
• 20V/60V MAX* FLEXVOLT Battery (DCB609)
• 6amp Charger (DCB1106)
• Fine Finish Blade – 60-tooth
• Blade Wrench
• Material Clamp
• Stabilizer Bar
• Vacuum adapter
• Dust Bag
• Base Extensions (2)

Portability

The DEWALT DCS781 is heavy and not a tool you want to have to move around often. This saw weighs 50.9 Lbs as a bare tool. The saw does have a large carrying handle at the top of the saw as well as handle indentations on each side of the saw to assist with transportation. These handle areas are well placed, sturdy, and could easily be used when you have larger bulky gloves on.

Due to this saw being large and heavy, an easier means of transportation from job site to job site is the DEWALT Rolling Miter Saw Stand. DEWALT does offer a stabilizer bar and has easily adjustable table extensions on both sides if you are using it on a solid surface.

Cut Capacity Specifications

The DEWALT saw has a maximum horizontal cutting capacity of 12-3/16″. It can cut baseboard up to 6-1/2″ vertically, and crown molding up to 6-1/2″ nested.

• Maximum Crosscut Capacity at 90° – 3″x 12-3/16″
• Maximum Crosscut Capacity L/R at 45° – 3″x8″
• Maximum Bevel Cut Angle to Left – 49°
• Maximum Bevel Cut Angle to Right – 49°
• Maximum Cutting Thickness – 6-3/4”

Regenerative Braking Technology

Similar to how an electric automobile utilizes its motor as a generator to recover wasted energy during braking and reroute it back into the battery, the saw’s regenerative braking system does the same. Instead of turning the braking energy into heat in the motor, the saw uses some of the energy lost when stopping the blade to recirculate it back into the battery. The material being cut will determine how much energy must be extracted from the motor for the operation, affecting the run-time benefit.

The DCS781 is equipped with an automatic electric blade brake which stops the saw blade within 5 seconds of trigger release.  This is the same time frame as the first-generation dual battery miter saw.

Note

On a few occasions, it was noted that there was a delay after the trigger release for the brake to engage. In the operations manual, DEWALT does mention that this can occur and offers a solution to fix the problem. They state ” If a delay or “skipping” occurs, turn the saw on and off 4 or 5 times. If the condition persists, have the tool serviced by an authorized DEWALT service center.” They do not explain as to why it could occur.

Number of Cuts on Single Battery | Run-time Test

A run-time test was conducted on the DEWALT DCS781.  DEWALT proclaims “exceptional run-time” stating it this saw can deliver up to 675 cuts on 3-1/4” MDF baseboard molding and up to 255 cuts in 4”x4” lumber.

For the run-time test, repetitive cuts were made using 2×6 KD lumber until the battery was exhausted. The saw was started and brought up to full speed. The saw was brought forward, the cut was made, and waited for the blade to stop.  3/4″ cuts on the lumber were achieved by using a positive stop and a DEWALT vise clamp. The cut piece was removed and then the process was repeated.

The test was conducted with a fully charged 9.0 Ah FLEXVOLT battery, which is included in the kit. It’s important to note that DEWALT has larger amp-hour batteries which will extend run-time significantly. The results of our test were 243 cuts in 2×6 KD lumber.

DCS781 | Job Site Performance

The DEWALT DCS781 did a stellar job on the 3-1/4″ primed finger-jointed baseboard trim remodel. There were a couple of special mitered cuts to accommodate a waterline behind a toilet.

This miter saw was used on a custom bedroom headboard project and noted clean and crisp cuts on our 1×8 pine shiplap

Capturing Dust at the Source

The DEWALT DCS781 saw has a built‑in dust port proprietary to their dust collection systems. It is called “Airlock” because of its twist-locking mechanism that allows the user to quickly connect and disconnect from tool to tool. It is simple to use and it swivels 360° to prevent the hose from becoming twisted during use.

If you are looking to hook up any DEWALT tool to a non-DEWALT brand shop vac or extractor, you are going to have to use some type of adapter to be successful. DEWALT does offer a universal dust extraction kit that has several adapters that most likely will fit the hose of your vacuum or extractor.

DEWALT claims a 94% dust capture at the source when using a dust extractor. During our run-time test, it was noticed that there was a good amount of dust left on the surface after the 243 cuts were made. It is safe to say there was more than 6% that was not captured, even while using the DEWALT DEWALT DWV012 10-gallon wet/dry HEPA Dust Extractor.

Crown Molding Bevel Pawls

The saw is equipped with pawls set to 22.5 ° and 33.9° bevel angles, left or right.  This allows you to quickly and accurately set the saw to cut at these bevel angles. When cutting crown molding laying flat, the saw can accurately and quickly set a crown stop, left or right. The crown bevel pawl can rotate to make contact with the crown adjustment screw. The saw is factory set to cut normal crowns in North America (52/38).

LED Cut Line

Miter saws with lights on both sides of the blade to create a kerf width shadow is a significant improvement in precision cutting technology. DEWALT is the original designer of this LED Cutline and now many manufacturers are following their direction. This LED cut line technology provides users with clear and exact cut lines, resulting in unmatched accuracy.

LED work light can be turned on by the momentary switch that will automatically turn off within 20 seconds if the saw is not in use. The light is also activated automatically every time the tool’s main trigger is pulled. The LED work light begins to flash when the battery is near the end of its useful charge and/or when the battery is too hot.

Single Battery Operation

This 2nd generation FLEXVOLT miter only requires a single 60v battery whereas the previous model required two. This is great for two reasons. First is the obvious, it only takes one battery to operate so users can have one battery on the charger while using one battery, therefore realistically cutting all day long with no interruptions.  The second reason would be the price reduction. FLEXVOLT batteries are very expensive, so reducing the cost of purchasing this saw as a kit, without reducing the power of the saws by losing a battery is something you will appreciate.

Single Battery Downfall

One downfall of the single battery operation is not having the ability to use a plug in adapter. The previous two battery model operated on two 60v batteries, essentially giving you 120v of power. This made it really easy to have a plug in converter. 60 Volts is much harder to do, and likely why there is not a plug in version. Yes this makes the saw kit cheaper, but not having a plug in adapter is a big hit in our crew’s opinion for a larger saw like this.

Final Thoughts

The DEWALT DCS781 is an excellent job site or shop miter saw. While a lot of our work can be done with a smaller-diameter saw, not all of it can and that’s where the DCS781 shines! You can always cut smaller with a bigger bladed saw, but not the other way around.  The three big improvements on this saw were the Regenerative Braking Technology, more power offered, and uses one less battery. If you are already using the dual battery miter saw, you have just reduced the need for 2 extra DEWALT FLEXVOLT batteries while maintaining all-day run-time.

DEWALT 60V Cordless 12in Sliding Miter Saw Kit Review is a post from Tool Box Buzz

FLEX 12″ Dual Bevel Cordless Miter Saw Kit – Model FX7141A-1J

FLEX 24V 12" Dual Bevel Miter Saw Kit

4.5/5

Manufacturer: FLEX
Model number: FX7141A-1J
Price: $799.99
Power source: 24v
Weight: 48.1 Lbs (bare)

FLEX, a tool manufacturer founded in 1922, developed the world’s first angle grinder in 1954.  FLEX has its headquarters in Germany and still operates independently, despite joining the parent company Chevron in 2013.  In North America, FLEX delivers power for professional contractors through their 24V cordless platform.

Features

• Voltage – 24V
• Blade Diameter: 12″
• Blade Arbor Hole – 1″
• No-Load Speed – 4,000 RPMs
• Max Miter Angle – L:0-52° / R:0-60°
• Max Bevel Angle – L: 0-48° / R:0-48°
• LED Shadow Line
• Weight – 48.1 Lbs (Bare Tool)

Kit Components

The FLEX FX7141A-1J miter saw kit comes with the following:

• Miter Saw – FX7141X
• 10Ah Stacked Lithium-Ion Battery – FX0341-1
• FLEX 24V 280W RAPID CHARGER – FX0421-2
• Dust Bag
• Dust Elbow
• Material Clamp
• On-board Allen wrench

Robust Design

The FLEX FX7141X Miter Saw weighs in at 48.1 lbs as a bare tool. All the moving parts on this saw are made of solid metal. Once the lever locks are engaged, neither the fence nor the table extensions move or wiggle. The fit and finish of the moving parts are excellent, as noted by the lack of slop or movement when secured in place.

Size

The FLEX miter saw has a large footprint that requires ample space to operate. The depth of the FLEX FX7141X measures 41-1/2″. That is from the front handle to the back of the sliding rail.  The measurement side to side with the base extensions fully open is 39-7/8″.  The height of the saw when closed and locked is 17-3/4″, however when open the height is 29-1/4″.

The miter saw has a top carrying handle as well as side carrying handles for the option of one or two-handed carry. These handle locations are comfortable and easy to use with gloves on. You should not carry this saw by the table extensions while they are extended.

When compared to other 12″ cordless miter saws, this FLEX saw is similar in size and weight.  Most remodeling contractors do not want to lug around a large, heavy saw like this. Our opinion is if you have this saw on a mobile stand to assist with transportation you should be ok. If not mounted on a mobile stand, this saw is better suited in the shop.

Spindle Locking Mechanism

The FLEX miter saw comes with a unique spindle locking mechanism lever which is different than your typical push button spindle lock.  FLEX calls it SpindleStop and the operator no longer has to hold down the spindle lock button while trying to loosen the blade bolt.

To remove the saw blade simply push the spindle lock lever down and rotate the blade slowly until it fully seats into its locked position. Then use the on-board Allen wrench, which is stored behind the right fence, to remove the blade bolt. This process is super simple to achieve. Because this feature stays locked in place until the level is returned back, FLEX has built-in a safety feature. When the main switch is pressed while the spindle lock is engaged, the LED shadow light will flash as a reminder to disengage the spindle lock.

Handle Design

The main switch has a lock-off safety lever that must be moved to the left to be able to depress the main switch. The safety lever keeps the saw from accidentally being turned on. The handle is large with a large opening allowing easy access for the operator to have gloves on.

The LED shadow light system is controlled by the shadow light switch and is independent of the miter saw main switch. This switch is located on the handle and can easily be engaged while holding the handle. This handle is comfortable for both left-handed and right-handed users.

Run-Time Test

FLEX claims that this saw will make 630 crosscuts in 3-1/4” MDF baseboard trim.  This run-time test is based on the saw running on a 10.0 Ah Stacked 24V lithium-ion battery. A run-time test was conducted on the FLEX FX7141X.

For the run-time test, repetitive cuts were made using 2×6 KD lumber until the battery was exhausted. The saw was started and brought up to full speed. The saw was brought forward, the cut was made and waited for the blade to stop. Cuts made were 3/4″ wide on the lumber using a positive stop and a vise clamp. The cut piece was removed and then the process was repeated.

The test was conducted with a fully charged 24V 10.0 Ah battery, which is included when you purchase the kitted version.  The results of this run-time test were 222 cuts in 2×6 KD lumber. After the 222nd cut, the saw would not turn back on. The LED light just flashed indicating a dead battery.

AC/DC ADAPTER

The FLEX miter saw is AC/DC compatible and uses an AC battery-like adapter. This feature is designed for long-duration remodeling jobs where constantly changing and charging batteries can be avoided or at the end of the day when your batteries are depleted but there is still more work to be accomplished.

The connection at the adapter pivots to eliminate wear and tear when the saw is angled or beveled. The FLEX adapter comes with a 12-foot cord section that allows for freedom of movement for various workspaces and applications. The adapter is also wall mountable, perfect if you are using the saw in your workshop.

Dust Collection

The FLEX FX7141A-1J kit comes with two options for dust collection. When purchasing, the users get a saw dust bag and a vacuum adapter. The vacuum adapter accepts vacuum hoses with diameters 1¼” (32mm) or 1½” (38mm).

The saw features a large rubber chute that collects dust, which functions adequately. It was observed that a considerable amount of sawdust accumulated on the back of the saw following the completion of the run-time test. A dust extractor, which had recently been emptied and fitted with new filters, was connected to the saw during the run-time test.

Ease of Use | Bevel and Miter

The miter gauge is easy to read with black letters on the silver plate. The gauge can be easily adjusted with a set screw and the on-board wrench (same tool as the hex key for blade change). The saw did require some adjusting of the set screw to get the blade perfectly dialed in.

The miter saw will bevel 52° to the left and 60° to the right. There are several positive detents at the common angles of 0°, 15°, 22.5°, 31.6°, and 45° both right and left. There is a button to press to eliminate the positive detents and set it to the desired angle. You can push the handle down to lock your non-detented angle.

The bevel adjustment handle has stages. If you pull the handle up one click, it will loosen the handle and it will stop at the next positive detent in the direction left or right. When you pull the handle forward completely towards you, it allows you to move to the desired angle. Once you have reached the desired angle, push the handle back down to lock it into place.

Positive Bevel Detents

• 0°
• 22.5° Left and Right
• 33.9° Left and Right
• 45° Left and Right

Cut Line | LED Light

Miter saws with lights on both sides of the blade to create a kerf width shadow is a significant improvement in precision cutting technology. This LED cut line provides users with clear and exact cut lines, resulting in unmatched accuracy. Many Tool Box Buzz crew members prefer the LED light shadow line versus a laser line. 

LED work light can be turned on by the momentary switch that will automatically turn off after 1 minute if the saw is not in use. One minute is too long for the light to stay on. 20-30 seconds is more than enough time to illuminate the work surface. The light is also activated automatically every time the tool’s main trigger is pulled. The LED worklight begins to flash when the battery is near the end of its charge.

FLEX FX7141X | Buying Options

The FLEX FX7141X is sold in two options; bare tool or in a kit.  The bare tool option gets you the saw, a dust bag, a vacuum adapter, a material clamp, and a blade change wrench for $599.99. The kitted version will give you the same as the bare tool but adds a 10Ah stacked lithium-ion battery (FX0341) and the 280w charger (FX0421) and costs $799.99. The AC/DC power adapter (FX0511-Z) is not included in the kitted version and sells separately for $199.00

Overall Thoughts

FLEX continues to impress the Tool Box Buzz Crew with its well-designed, well-thought-out power tools. FLEX continues to make waves not only in the power tool category but also in the lighting, accessories, and tool storage areas. We were impressed with FLEX’s cordless miter saw with a long run-time on a 24V 10Ah stacked lithium-ion battery with the option of AC/DC power. Their power tools are always finishing near the top on our Head-To-Head tests and we feel that when we do another large Cordless Miter Saw Head-To-Head this FLEX FX7141X will not be any different.

FLEX 24V 12″ Dual Bevel Miter Saw Kit Review is a post from Tool Box Buzz

Ryobi Speed Bench Mobile Workstation  – Model STM202

Ryobi Speed Bench Mobile Workstation

4.5/5

Manufacturer: Ryobi
Model number: STM202
Price: $199.00

RYOBI  recently introduced its new Speed Bench Mobile Workstation. This workstation is an innovative 2-in-1 product designed to transform from a mobile 2-wheel cart to a workbench. Ryobi sent us the Speed Bench [Model STM202] to test and evaluate. The new Speed Bench is set to be released this May and will be sold exclusively at the Home Depot. Let’s take a closer look at this unique product and see how it performs.

Ryobi STM202 Specifications

First Impression

There are four things to look for when it relates to a good workstation. They are pre-assembly requirements, durability, portability, and the amount of work surface they provide. Three of these [excluding portability] can be determined right off the bat when unboxing.

Upon first glance, the new Ryobi Speed Bench Mobile Workstation exceeds expectations that are usually connected with Ryobi’s reputation of just being the “power tools sold at the local Home Depot”. Due to the speed bench’s adaptability and well-built design, we feel you might be seeing this innovative mobile workstation on both job sites/workshops as well as in DIY enthusiasts’ garages.

Ryobi has stepped up their game with this new innovative workstation

Transforms From Cart to Workbench

The Speed Bench Mobile Workstation can be set up effortlessly with one fluid motion, allowing users to transport and set up where needed. Simply depress a locking mechanism with your foot and push the cart handle down in one fluid motion. This locking mechanism releases wheels and the table tilts to 180° for use as a workstation.

Locking Mechanism

The locking mechanism locks the table upright while also providing support for both the workbench and the cart operations. We found the design of the locking mechanism easy to disengage, just by tapping it with your foot. When done working, the workstation quickly folds into a cart and is easily stored or transported.

Durable Steel Frame

Portability

Solid Wood Work Surface

The Ryobi Speed Cart features a big workbench surface made of Parawood. Parawood is sturdy, resists warping, and provides a firm bench top surface excellent for supporting saws, clamping wood, and a variety of other applications. The surface is large enough to accommodate larger power tools.

The wooden surface measures 42″ wide and 22″ deep. We did not want to put holes in the surface to mount a miter saw with bolts and nuts, we simply used it on flat ground and just had the saw sitting on the work surface. The surface of the workstation was deep enough to hold a 12″ miter saw base without having it overhang.

Perfect for Assembly

“The Ryobi Speed Cart is an excellent mobile assembly table for a variety of projects.” On a recent project, the Speed Bench worked perfectly with the Kreg Jig system to make a headboard. The spacious, solid work surface was ideal for clamping the Kreg Jig clamps to the headboard while fastening. All four sides of the Speed Cart table top have enough space for clamping.

During the same headboard build, the Speed Bench was used as a miter saw stand while cutting the lumber down to size. The surface of the workstation was deep enough to hold the large saw base without having any overhang.

Work Surface Markings

Convenient SAE/Metric measurements and a protractor are printed on the surface for easy reference while working. These lines are good for a quick measurement when a tape measure is not handy.  These lines are black and bold which makes them stand out and are easy to read, even in low-lit areas.

The angles from left to right read 15°, 30°, 45°, 60°, 75°, 90°, 75°, 60°, 45°, 30°, and 15°. Additionally, the bottom of the work surface features a 40″ ruler divided into 1/4″ increments. We tested these measurements using our digital angle finder, a rafter square, and a tape measure and they proved to be accurate.

Ryobi Speed Bench Mobile Workstation Video Review

Ryobi Speed Bench Mobile Workstation Review is a post from Tool Box Buzz

Ridgid 18V Cordless 16GA Straight Finish Nailer – Model R09893B

Ridgid 18V Cordless 16GA Straight Finish Nailer

4/5

Manufacturer: RIDGID
Model number: R09893B
Price: $269.00
Power source: 18V
Weight: 5.6Lbs

The finish nailer is a vital tool for any carpenter’s toolbox. A finish nailer is especially beneficial for installing baseboards, hardwood flooring, cabinet trim, door and window casings, chair railing, crown molding, and any trim that requires larger finish nails. For smaller more delicate applications users would lean towards a brad nailer or pin nailer to not damage trim pieces with blowouts and splitting.

In quarter 1 of 2024, Ridgid released their second generation cordless straight finish nailer, the R09893. This finish nailer is sold as a bare tool or in a kit with a 2.0 Ah battery. It should be noted that for this review, Ridgid sent us the R09893B finish nailer with a larger 4.0 Ah battery to test which is currently not available in any kit combination.

Ridgid R09893B Specifications

• 16ga straight finish nails between 1-1/4″ – 2-1/2″
• LED Light
• 1,700 nails per 4.0 Ah Battery
• Tool-free depth of drive adjustment dial
• Single Fire or Sequential Mode
• Tool-free jam release
• Dry-fire lockout

Setting the Power

The Ridgid R09893B has a unique feature that allows the user to control the power delivered when the nail is fired. This feature would function similarly to regulating the pressure on a compressor. The amount of power required will depend on the size of the nail and the workpiece material. This is especially useful for driving fasteners into soft materials like MDF or pine to prevent blowouts or splits in softer wood trim. This feature can be utilized in conjunction with the nailer’s nose-mounted depth of drive adjustment.

Power Test on Pine

We tested the power function using 2″ 16 ga straight finish nails on both pine and poplar. We wanted to see if we could find the “sweet spot” between the power setting and depth of drive. During the pine test, we started on max power and max depth of drive and noticed that the nails sank too deep. We turned the power down to the lowest setting and kept the depth of drive to the deepest and noticed the first couple of nails did not set at all.  We were able to achieve our “sweet spot” with both the Power and the Depth of Drive set in the middle.

Power Test on Poplar

Poplar is a hardwood that remodeling contractors find themselves using quite a bit. We conducted the same type of test as we did on the pine wood. Starting at half the power and max depth of drive the nails sat flush with the wood. We got the same results when we upped the power to full and the depth of drive to half. With max power and max depth of drive, we were able to fire several nails that sank just below the surface. We also did a rapid bump fire test with 2″ nails, shooting 20 in a row with perfect depth.

Depth of Drive Adjustment

The depth of drive has 26 depth settings between the shallowest setting and max depth. The knob is knurled and easily located at the top right side of the nailer but is smaller than other finish nailers we have used.

The results of the depth of nails fired were consistent. Once we located the sweet spot for both the air power and depth of drive our nails set to the correct depth. We feel that the depth of drive adjustments was cumbersome while wearing gloves due to it being recessed lower than the housing next to it, making it harder to turn.

Ridgid R09893B | Compact Size

Ridgid has made impressive cuts in size and weight without sacrificing power or functionality. In comparison to the previous model R09892B, the newer R09893B is 10% more compact.

Ridgid R09893B vs. R09892B

12.20″  High    |    12.40″ High
13.10″ Wide    |    14.12″ Wide
3.90″ Deep      |    5.11″ Deep

The new Ridgid R09893 is 15% lighter than the previous model R09892.  The new model weighs 5.60 lbs versus the older model’s 6.60 lbs weight. When paired with the 4 Ah battery the nailer is still heavier than a pneumatic nailer. We feel that this is the price to pay when going cordless.

The nailer has a small nose with a no-mar tip which is great for user visibility. The R0989B comes with onboard storage for an extra no-mar tip that is located on the magazine of the tool. We thought the extra no-mar pad might become loose or lost during use or transportation but found it secure and still in place after a month of using the nailer.

Tool Free Jamb Release

Jambs can happen for a majority of reasons. Clearing the jamb from the nailer is simple to accomplish.  After removing the battery and releasing the strip of nails in the magazine, the Ridgid R09893B has a quick-release latch at the top of the nailer. „ Pull up on the latch and open the jam release. Remove the bent finish nail, close and secure the latch, install the nails, and resume fastening. If a nail or fastener becomes jammed in the tool, remove the battery pack and keep the tool pointed away from you while clearing the jam.

Loading the Nails

The Ridgid R09893B has its nails fed into the magazine from the bottom. After sliding the nail strip in and far enough up, slide the pusher to the rear of the magazine. Release the pusher and allow it to push the nails up to the top of the magazine.  The pusher will stop when it rests against the end of the nail strip.

The crew likes that the Ridgid R09893B has an open design magazine. It allows the operator to easily see the amount of nails remaining. The R09893B has a dry fire lockout feature. When the magazine has 6 nails remaining, the dry-fire lockout feature will not allow the user to continue to fire until the nails are reloaded. The LED light will flash when the dry fire lockout feature is engaged.

Ridgid R09893B | LED Light

The Ridigid R09893 has a bright LED light at the tip of the nailer and provides good work area coverage. There is a switch on the grip of the nailer that allows the user to turn on the LED without the need to press the firing trigger.

The small nose and LED light to provide a great line of site and nails hit exactly where they need to”

Nailer Firing Modes

This finish nailer has a single sequential actuation mode and contact actuation mode. Single sequential actuation mode provides the most accurate finish nail placement.  Contact actuation allows very fast repetitive fastener placement which typically is not necessary in finish carpentry.

Kitted or Bare Tool Options

The Ridgid R09893B is a bare tool option that comes only with two no-mar tips and a user guide and sells for $269.00. The kitted version is model R09893K which includes the 18V Brushless 16 Gauge Straight Finish Nailer, (2) No-Mar Tips, (1) R87002 2.0Ah Battery, (1) R86093 Charger, and Operator’s Manual. The kitted version sells for $319.00 exclusively at the Home Depot.

Conclusion

Do not forget their Lifetime Service Agreement which offers free parts and service for life. For Ridgid’s Lifetime Service Agreement details click here: Ridgid Life-Time Service Agreement

#HomeDepotPartner

#MyHomeDepot

Ridgid 18V Cordless 16 GA Straight Finish Nailer Review is a post from Tool Box Buzz

Ryobi 40v Hybrid 20″ Air Cannon – Model RY40HF01

Ryobi 40v Hybrid 20" Air Cannon

4/5

Manufacturer: Ryobi
Model number: RY40HF01B
Price: $229.00
Power source: Hybrid [40v + AC/DC]
Weight: 30 Lbs

Ryobi sent us their new 40v Hybrid 20″ Air Cannon to test and evaluate. Fans are the unsung heroes of our daily grind on long, hot days. Not only are fans useful on hot Summer days, but they are extremely useful working in warm rooms like mechanical rooms and poorly ventilated spaces.

Ryobi RY40HF01 | Specifications

• • 6,300 CFM on High Setting
  • Hybrid Option: Battery & AC/DC capabilities
  • 34 hours of run-time on low w/ RYOBI 40V 12Ah battery
  • Durable metal construction
  • 180° pivoting head
  • Pivoting handle
  • 6″ all-terrain wheels
  • Low / Med / High |speed settings

Noise

With the name “Air Cannon” most people will likely assume this fan is loud. The Ryobi RY40HF01 is part of their Whisper Series line and is extremely quiet. Ryobi has several tools in their Whisper Series line. These include; cordless blowers, lawnmowers, string trimmers, and fans. Ryobi continues to cut down the noise, while still delivering the power needed to get the job done.

We performed a decibel test with an app on an iPhone called “Decibel X”. We have used this app on other tool testing and the results on those tests were extremely close to what the MFG specs were. The phone was placed at the user’s ear height and 8′ away from the fan but in the fan’s wind path. The fan was set on the ground and the fan pivoted towards the user.

Decibels Recorded

• • • 77.1 was the max decibels recorded on HIGH.
    • 65.5 was the max decibels recorded on MEDIUM
    • 44.8 was the max decibels recorded on LOW

Whether employed in a workshop or inside the household,  this fan operates very quietly, allowing for uninterrupted conversations or unexpected phone calls. Surprisingly quiet, it improves the workspace as a whole, creating an ideal environment for uninterrupted work.

CFMs Per Settings

The Ryobi RY40HF01 Air Cannon comes with four operational settings. There is a large speed switch on the right side of the fan. On this speed switch, there is 0-Off, 3-High, 2 – 2-Medium, and 1-Low. Here is a list of the CFMs per Ryobi on each setting.

• • High – 6,300 CFMs
  • Medium – 4,450 CFMs
  • Low – 2,850 CFMs

Ideal Usages

The Ryobi RY40HF01 Air Cannon fan proves invaluable in many different applications. Whether it is keeping the air flowing through the workshop, or expelling paint fumes or dust, this air cannon has got it covered. Outdoors, it transforms into a cooling beast, offering relief from sweltering temperatures. Having the air cannon handy for that backyard BBQ or weekend camping trip is a must. With the rugged wheels and portability, we feel that this fan would be delightful at the beach on a hot summer afternoon.

During renovations, the fan can efficiently clear demolition dust. The large volume of airflow can quickly displace particles ensuring a cleaner workspace.

We used it in the shop to provide ventilation and cooling and to assist in drying cedar clapboards that we pre-painted indoors due to the colder outside temperatures. We can also see the Air Cannon being useful when used to dry wet spaces or floors due to cleaning, or water leaks.

The versatility of the Ryobi RY40HF01 air cannon extends beyond just air movement, making it essential for comfort, safety, and efficiency in various environments and tasks.

Air Cannon | Run-Time

The Ryobi RY40HF01 has an impressive run-time. Ryobi says it will get 34 hours of continued run-time on the lowest setting using a 40v 12Ah battery. As you can see in the diagram above, times reduce roughly in half when going to a 6.0Ah and three-quarters when running with a 4.0Ah battery.

AC/DC Capable

One nice feature of the Air Cannon is that it is a “hybrid fan,” meaning it has AC/DC capability. If you need continuous operation you have the option to plug in an extension cord. [Cord not supplied] This plug is located inside the bottom of the battery compartment.

TBB Crew member Rob was so impressed with the Air Cannon that he is going to put it in his shop as a permanent fixture, permanently plugging it into line voltage.

Adjustment Knob | Pivoting The Fan

The Ryobi Air Cannon has one large-sized adjustment knob for fan pivoting,  located on the left side. To modify the fan head’s angle, loosen the adjustment knob. When loosened, this knob allows for 180° of pivot. To secure, select the desired position and tighten the knob.

Portability

The Air Cannon comes with 6″ rubberized wheels which assist with maneuverability and portability on the job site. These wheels required assembly after unboxing. One bolt and 3 washers per wheel and set up was complete.

We found that the Air Cannon rolls easily over grass, gravel, and concrete.  To assist in transportation there is a large, collapsible handle on the top of the unit, the handle folds down when not in use. This handle is robustly constructed with ABS plastic and metal pivot pins. The handle rotates off a stationary [black colored] crossbar that we found useful for securing cam straps to when transporting this fan in our work van.

Two-Handed Carry

On the opposite side of the fan, just above the battery location is an indent designed to assist as a “built-in” handle when lifting the fan with two hands.

Sturdy Construction

The Air Cannon is constructed mostly of metal components and some ABS plastic. Ryobi used metal where it counts; on the frame, axle, fan shroud and fan grill.  Its clear that some thought was put into the use of metal as it appears robust and designed to withstand transportation and falls, ensuring durability and longevity in your investment.

Room for Improvement

We’d like to highlight one potential improvement idea. The recessed carry handle on the battery side could benefit from being larger. We noted that a few of us found it too narrow for our hands when carrying the unit from a van or trailer.

Overall Thoughts

When it comes to the Ryobi 40v line of equipment, we feel that they continue to get it right.  Our crew has always been impressed with the outdoor power equipment, and this hybrid air cannon fan is no exception. With three speeds, the option for all-day run-time, and the ease of portability, your scorching job sites will soon be tolerable and might even have you reaching for that long-sleeved sun shirt. It is really quiet and will not interfere with your normal job site conversations or make you turn the volume up on the radio.

#HomeDepotPartner

#MyHomeDepot

Ryobi 40v Hybrid 20″ Air Cannon Video Review

Ryobi 40v Hybrid 20″ Air Cannon Review is a post from Tool Box Buzz

Best New Products from World of Concrete 2024

Every year the World of Concrete show produces some awesome tool releases. Big companies have the opportunity to showcase what’s new in the coming months of 2024! Now that the dust has settled and the crew has collected our thoughts, we have put together what we feel were some of the best newly released tools shown at World of Concrete.

Of course, there were hundreds of new and innovative tools that we checked out, but these are the ones we think make a huge impact on the industry. We are going to try and get our hands on these and many more for independent reviews or in our Head-To-Head Testing.

Bosch 12v Inspection Camera

Bosch has upped their game with the release of the new 12V Max Connected 5 Ft. Handheld Inspection Camera (GIC4-23C). The GIC4-23C Inspection Camera has a high-resolution, easy-to-see 4 in. LCD that takes color images and can store up to 30 videos and photos. The buttons and menu are simple, properly marked, and user-friendly.

The inspection camera has a rubber housing combined with an IP67 (camera cable) and IP54 (tool) rating, offering the user enhanced protection on the job site. Pictured here is TBB crew Rob using the inspection scope inside a makeshift wall a the Bosch booth. The LED screen is 1280×720 pixels.

This inspection scope is one of two that Bosch will sell in a kit. Bosch will also offer an 11′ camera cord option. This will be model GIC5-27C. Both kits include a camera, batteries, charger, and a Bosch L Box with molded insert.

Diablo Amped Rebar Demon Masonry Drill Bit

A few years ago, Diablo introduced the Rebar Demon masonry drill bit solution for SDS Plus and SDS Max with a full carbide cutting head. The Rebar Demon combined Diablo’s great concrete drilling solution with the ability to cut through rebar. While those bits were definitely a game changer, they didn’t address the need for a better dust control solution. Dust control is an extremely important issue when it comes to worker health, jobsite cleanliness, and proper hole preparation for adhesive fasteners.

The Diablo Amped Rebar Demon addresses the dust control features that were missing in the original Rebar Demon. The Amped Rebar Demon has a new design that includes an exceptionally high-quality full carbide head and a stainless-steel sleeve for dust control. The innovative shaft design allows for the seamless suction of dust through a hose adaptor, resulting in a clean and efficient operation.

Diablo anticipates these Amped Rebar Demon bits to retail between $50 and $60 each and is set to be released mid to end of Quarter 2 2024.

Milwaukee Dual M18 Battery 9 Gallon Dust Extractor

The new M18 FUEL PACKOUT Dual Battery 9 Gallon Dust Extractor runs on two M18 battery packs and features twin automatic filter cleaning to maximize suction performance. The M18 FUEL Dual Battery 9 Gallon Dust Extractor combines cordless convenience with corded performance.

For more productivity on the job site, users can activate the M18 FUEL Dual Battery 9 Gallon Dust Extractor from a remote or tool thanks to VACLINK, an incorporated wireless dust control feature. In order to ensure optimal performance and maintenance of airflow levels, the M18 FUEL Dual Battery 9 Gallon Dust Extractor has an incorporated low-flow alarm that notifies the user when the airflow reaches a point where dust extraction is no longer effective.

The crew likes the PACKOUT compatibility on the top of the vacuum. This allows us to “stack and go” with the vacuum accessories or tools we need for that specific application.

The M18 FUEL PACKOUT Dual Battery 9 Gallon Dust Extractor is set to be available in quarter 3 of 2024.

DEWALT POWERSHIFT Battery Platform

DEWALT unveiled their new POWERSHIFT Battery Platform and associated power tools that use the new batteries. Here is a brief breakdown of the DEWALT POWERSHIFT batteries and power tool options coming soon.

POWERSHIFT Battery & Charger

The new DEWALT POWERSHIFT offers a high-power battery with 554 WH of capacity. This battery has pouch cell technology which allows for a more compact, lightweight design, and weighs 11.5 lbs.  DEWALT’s POWERSHIFT standard high-rate chargers can charge these large batteries in less than one hour.

POWERSHIFT Plate Compactor

The new POWERSHIFT Plate Compactor offers 3,370 ft-lbs. of force. The compactor has a large, 15.7″ plate. The controls are mounted on an ergonomically designed folding handle for increased user control and comfort. The compactor comes with a wheel kit for ease of maneuverability. It also features a water tank which will assist in keeping the dust levels lowered.

POWERSHIFT Rammer

The new POWERSHIFT rammer weighs in at 132lbs. It features 2,660 ft. lbs. of impact force with anti-vibration technology. The rammer has a patent soft start and has mounted controls on the two-position handle for ease of use operation. The Rammer and the Plate Compactor have the same control panel buttons for operator familiarity.

POWERSHIFT Backpack Vibrator

DEWALT’s POWERSHIFT Backpack Vibrator is lightweight, weighing  25 lbs with the DEWALT POWERSHIFT battery installed. This backpack vibrator provides 60 minutes of continuous run-time. The pack itself has a durable roll cage with a fully adjustable high visibility harness for safety.

Vibrating head size options for both the backpack and the power pack are as follows:

• 2-3/8″ vibrating head
• 2″  vibrating head
• 1-3/4″ vibrating head
• 1-1/2″ vibrating head

POWERSHIFT Powerpack Vibrator

The POWERSHIFT Powerpack Vibrator has a manual switch but also can be activated remotely through DEWALT Wireless Tool Control.  The pack is carried with an over-body harness with the same high visibility material as the backpack vibrator. The pack has the same style of roll cage as well for protection.

Shaft length options for both the backpack and the power pack are as follows:

• 7′ shaft
• 10′ shaft
• 16′ shaft
• 21′ shaft

POWERSHIFT Power Screed

DEWALT’s POWERSHIFT Power Screed features fully adjustable handles for customizable height and width for user comfort. In addition, ambidextrous controls can be mounted on either handle for user preference. This power screed will run up to 90 minutes on continuous full throttle on a single battery. The screed has the power to pull a 16′ bar.

POWERSHIFT Core Drill and Stand

DEWALT’s POWERSHIFT core drill can be removed from the stand and used with a 60v FLEXVOLT battery independently. The core drill can wireless connect to the water tank with a water flow dial on the handle of the core drill so the user does not have to take their hand off the handle, allowing for a safer operation. The core drill has anti-rotational technology to prevent over-rotation in bind-up situations.

The DEWALT Core Drill will be available in September 2024. DEWALT’s new line of core drill bits will launch sometime between February and March. Additionally, the connectable water tank will reach stores this March.

POWERSHIFT Adapter

DEWALT continues to focus on backward tool battery compatibility. The DEWALT POWERSHIFT adapter allows for a FLEXVOLT battery to be inserted for additional run-time on all POWERSHIFT equipment. All DEWALT FLEXVOLT batteries will work in the adapter. DEWALT recommends larger packs such as 15Ah or 9Ah for longer additional run time.

Milwaukee MX FUEL ROCKET Dual Power Compact Tower Light

Milwaukee’s latest offering in equipment lights is the new MX FUEL ROCKET Dual Power Compact Tower Light. This light provides faster set-up and maximum portability. This compact tower light is PACKOUT compatible. According to Milwaukee, this light tower gives off  five times more usable light than the Milwaukee 2131-20 M18 Rocket Dual Power Tower Light.

Features

• 15,000 Lumens
• 49.5 lbs with battery
• 2,300 SQ FT Coverage

MX Rocket Dual Power Tower Light Run-time

The MX Rocket Dual Power Compact Tower light has an AC power option if power is available on-site for unlimited run-time. Here are the projected run-times according to Milwaukee on an XC406 (XC6.0), FORGE XC8.0, and FORGE HD12.0

Setting Lumens

With the kitted XC406 (XC6.0) battery here are the lumens per setting.

• Low – 5,000 lumens
• Medium – 8,500 lumens
• High – 15,000 lumens

The tower light is IP56-rated for water and dust. The light also features Milwaukee’s One Key technology for tool crib management, lockout, or theft. The MX FUEL ROCKET Dual Power Compact Tower Light is set to be available in quarter 3 of 2024.

Availability

The majority of these tools will be available over at ACME TOOLS in the coming months! Check them out here: Acme Tools

Best New Products from World of Concrete 2024 is a post from Tool Box Buzz

Ridgid 18v 23GA Cordless Headless Pin Nailer – Model R09898B

18V Cordless 23-Gauge 1-3/8 in. Headless Pin Nailer

4/5

Manufacturer: Ridgid
Model number: R09898B
Price: $219.00 (Bare Tool)
Power source: 18v
Weight: 3.3Lbs

With the release of the 18V Cordless Headless Pin Nailer, Ridgid has become another major tool brand with a full lineup of cordless nailing solutions. Ridgid claims that this pin nailer will shoot up to 1,875 nails on a full charge of a 2.0Ah battery. Let’s take a closer look at this nailer and how we used it on our projects.

Ridgid Pin Nailer Features | Specifications

• Battery Voltage – 18V
• Nailing Capacity – 1/2″ – 1-3/8″
• 1875 Shots per Charge of 2.0Ah Battery
• Bright LED Light
• Lifetime Service Agreement
• Belt Hook
• Clean Drive Technology
• 3.3Lbs
  

Compact Design

As soon as you pick up the Ridgid R09898B, its compact size is what draws your attention. Because of its ergonomic design, which provides a comfortable grip, long-term use is possible without tiring out the hands. The R09898B is a great choice for on-site and workshop applications due to its cordless portability.

The Ridgid Cordless Pin Nailer is lightweight, comfortable, and has a great line of sight. It’s a great addition to the Ridgid 18v nailer line up!

Measurements

• Height – 8.9″
• Depth – 7.7″
• Width – 2.8″

Depth of Drive Setting

The Ridgid R09898B has a large depth of drive adjustment knob located on the right side of the nailer, just under the top plate. It is large and has an aggressively gnarled wheel for easy adjustments.

The knob has a positive click as you adjust it. We were not ale to test the depth of drive adjustment responsiveness, I’ll explain that more in a moment.

Pin Nailer | Nail Capacity

The Ridgid R09898B has a nailing capacity of 1/2″ to  1-3/8″. These sizes are pretty standard across the board when it comes to pin nailers.

The magazine has a pinch release mechanism at the bottom of the magazine to open. Once the nails are seated with the arrow facing forward, you can push the magazine cover up and lock it in place. There is a window on the magazine for visual on how many nails remain.

LED Light

The Ridgid R09898B has a nice, bright LED light with a unique position. The LED is angled up at a 45° angle allowing for illumination of the general fastening area.

No Mar Tip

The R09898B comes with two orange hard plastic no marr tips. Non-mar contact tips are a nice feature on nailers as long as they don’t obscure your line of sight.

The tip is securely held in place, (it is hard to remove) which we like because it’s more likely to stay in place over time.

The reserve tip is clipped on the rear of the magazine.

Fastener Jamb Clearing

Fastener jambs can occur for various reasons. It should be noted that during our shop and field testing and evaluation, we did not have any jambs on the nailer. Ridgid provides an onboard hex key for top plate removal. The hex key sits at the bottom of the nail magazine. It secures into a slot and then presses into a channel allowing for a snug fit and less of a chance of falling out.

A feature we like is the keyholes on the top plate. This allows you to loosen the screws and slide the plate off rather than taking the screws completely out, risking the chance of losing them.

Trigger

The Ridgid has a  traditional-style double trigger system. If you’ve used pin nailers on small trim parts you know that the contact tip when depressed, can move your trim piece – the double style trigger eliminates that frustration.

With the dual trigger system. The first trigger serves as the safety switch, and you need to pull it to disengage the switch. Then you need to pull the second trigger to fire the pin into the work piece.

Ridgid Pin Nailer | On the Job

We used the Ridgid pin nailer to build a custom fireplace mantle with all mitered edges. Pin nails were used to secure the mitered edges while the glue dried. after mitering the parts with a table saw, we used blue painter’s tape to align the parts while we glued the joints.

Once glued, we folded each section at a time and fastened them with 1-3/8″ pin nails to hold them in place for clamping.

On the same project, we used the R09898B Pin nailer to secure thin outside corner trim over our shiplap wall covering.

The trim was pre-painted and the pin nailer was the perfect tool for leaving tiny, unobtrusive holes, requiring a small amount of touch-up paint.

Clean Drive Technology

The Ridgid R09898B features Clean Drive Technology. Ridgid claims that the Clean Drive Technology enables the operator to shoot nails flush at any angle, reducing trim blowouts.

When we tested this feature we discovered the following:

• Straight On – all nails were fired straight on, set into the wood perfectly.
• Left and Right Angles – All nails fired were set slightly proud of the wood surface.
• Forward Angle – this position was not scored as it is not a normal nailing position since the tools contact nose comes off the work piece.
• Rear Angles – nails were set int the wood at an acceptable depth.

Testing Nail Penetration | Depth of Drive

We conducted a nail penetration test on what we feel are the most popular species of trim remodeling contractors use in the field.

• Poplar
• Red Oak
• Soft Maple
• Pre-painted Maple cabinet trim
• Poplar molding and small trim parts

Poplar

On our Poplar test we had to set the nailer to almost MAX depth setting. At that setting the pin nails that were fired were set perfectly just below the wood.

Red Oak

Our 3/4″ Red Oak test was done with the nailer set to MAX depth setting and almost all of the pin nails were proud of the wood. When we applied “light” pressure to the nailer, the nails were driven flush, and when added more pressure, they sank just below the wood grain with many leaving firing pin marks.

For comparison we used a pneumatic pin nailer in the Red Oak and easily set all the pins below the surface. In this hardwood scenario the cordless pin nailer couldn’t produce as much power as the pneumatic pin nailer.

Pre-Painted Maple Cabinet Trim

We took some Maple cabinet trim we had from a previous remodel and cut 45° miters to test fastening in pre-painted material.  This is a practical, in the field, installation carpenters encounter on almost every remodel. This test showed inconstant depth settings, when pressure to the tool was applied fastener setting improved, but often left a firing pin mark. More on this when we discuss room for improvement.

Applying Pressure To a Pin Nailer

When joining trim in the field there is a fine line with holding the miter together, and applying tool pressure, and then trying to fasten it with a pin nailer. The goal is to hold the mitered trim in place without moving it with pin nailer pressure. That’s why pin nailers have the  double style trigger to eliminates applying too much pressure to the work piece.

Dry-Fire Lockout

When the magazine has 0-10 nails left, the dry-fire lock-out mechanism prevents you from firing any nails. When the last nail is utilized, and the LED light will flash rapidly to alert you to reload fasteners.

Room For Improvement

In our testing the cordless pin nailer struggled with hardwood trim applications. After several discussions with the team at Ridgid we discovered that part of the issue is the 2.0 Ah battery pack that was sent to us for testing. This tool is sold as a bare tool and we also received a 2.0 Ah battery to use with it. Engineers for Ridgid pointed out that this tool performs much better in hardwood applications with a larger 4.0 Ah battery pack. This does make sense as we’ve seen much better performance on higher demand applications using larger density packs, not only with Ridgid tools but with all brands.

So users that want to use this cordless pin nailer for hardwood applications should use a larger 4.0 Ah battery pack for the best performance and power.

Price

The Ridgid pin nailer sells as $219.00 and can be purchased at Home Depot here:

Closing Thoughts

By adding the 18v cordless pin nailer to their arsenal, Ridgid now has a complete lineup of  cordless nailers. The Ridgid R09898 18v cordless pin nailer shined on the Poplar and Pine we tested on. It struggled more as the wood species got harder like the Red Oak and Maple. For these harder types of wood species, users should be sure to use a larger 4.0 Ah battery pack for maximum performance.

In the world of pin nailers, the Ridgid R09898B sits well for carpenters, serious enthusiasts and DIYers. If you currently operate on the Ridgid 18v battery platform this nailer is definitely something you want to have to round out your nailer arsenal.

#HomeDepotPartner

#MyHomeDepot

Ridgid 18V 23GA Cordless Headless Pin Nailer Review is a post from Tool Box Buzz

RYOBI 18v Cordless Oscillating Multi-Tool – Model PBLMT51B

RYOBI 18v Cordless Oscillating Multi-Tool (Bare Tool)

4/5

Manufacturer: RYOBI
Model number: PBLMT51B
Price: $119.00
Power source: 18v Lithium Ion Battery
Weight: 1.95LBS

Oscillating multi-tools are very versatile cutting tools with many uses including cutting off nails, screws, and small bolts, cutting door jambs for flooring installation, cutting holes in drywall, removing grout between tiles, light demolition, and much more

Gen 2 OMT Features | Specifications

• OPM – 0-20,000
• Oscillating Angle – 3.8°
• Variable Speed Dial
• Converts to detail sander
• Cuts 80% faster and 2.5x more cuts than Gen 1
• 86% lower vibration than Gen 1
• LED Light

Gen 2 OMT Components

The RYOBI PBLMT51 comes with the following items.

• 18v Brushless OMT
• Plunge Cut Blade
• Flush Cut Blade
• Sanding Pad
• Sandpaper for pad: 60 grit, 80 grit, 120 grit

RYOBI 18v Oscillating Multi-Tool | On the Job

We used the RYOBI Oscillating Multi-Tool on a custom fireplace build. Some of the applications involved cutting back old baseboards to install new solid trim up to it. Additionally, we used the OMT to cut back some shiplap that was installed a little too “proud” so we could fit an electric insert fireplace.

Variable Speed

RYOBI, like the majority of OMTs on the market, adjusts the speed of oscillation with a rotary dial. The dial is situated on the tool’s top and is easily visible while operating the tool in case you need to adjust during cutting.

 Love the speed dial placement, it’s easy to locate and adjust on the fly while cutting.

Variable speed is an important option on oscillating multi-tools due to the range in cutting applications these tools are used for. Depending on the type of blade and the material being cut, the speed of the blade can have a significant impact on the quality of the cut and how well the material cuts. So having this option available is a great feature.

When the variable speed dial is fully clockwise to the “1” position, the tool is in the LOW position. When you spin the dial, you can feel it click into the detent. Turn the dial counterclockwise to select faster speeds. At 0 – 20,000 OPM, the variable speed dial gives you complete flexibility over a wide range of applications.

Blade Change

RYOBI OMT features a tool-free blade change for quick and easy accessory changes.  The head of the multi-tool has a release lever that pulls back, when it pulls back the retainer pin slides out. Once the new blade or other accessory is installed, slide the pin back in and reset the lever.  While we understand the need for the retaining pin to be removable, we feel that it is just another small part of a tool that could perhaps get misplaced or lost if accidentally dropped while changing out blades/accessories. More expensive OMT’s have done away with this type of blade lock for this very reason.

Trigger VS On-Off Switch

One feature I like on the RYOBI OMT is the trigger. In my opinion, the trigger is better than an on-off switch. The trigger allows the ability to “feather in” or “soft start” the OMT versus the on-off switch. Once I get my cut lined up where I want/need it to be, I can go full throttle and get the cut made.

LED Light

When working in dimly lit areas, the LED work light is handy to illuminate your workspace. The LED light on the OMT is located at the front of the tool just above the blade and allows for good lighting coverage.

Final Thoughts

The ergonomic design of the handle allows the OMT to be well-balanced in the hand while cutting!

With over 280 products, the RYOBI 18v One+ line of tools provides the versatility to get the job done. Even better is the availability of these tools at the local Home Depot. No waiting or shipping is required. Because of their extensive lineup and also the ability to get what you need, when you need it, and at an extremely reasonable price is what makes this RYOBI 18v Cordless Oscillating Multi-Tool highly recommended!

#HomeDepotPartner

#MyHomeDepot

RYOBI 18v Cordless Oscillating Multi-Tool Review is a post from Tool Box Buzz

Festool Enters the World of Outdoor Adventures

Weather your enthusiast or are looking too treat yourself, or you know one,  Festool has you covered with their outdoor themed Festool Systainer. This new Systainer package features two insulated stainless steel Festool branded mugs and a camouflage-style Festool hat.  It is also compatible with Festool’s well-known Systainer system, which offers effective ways to move, arrange, and store tools, parts, and accessories for the workshop and job site.

The Outdoor Systainer Includes:

• [2] Two Festool insulated stainless steel mugs
• [1] Festool  camo-style hat.
• [1] outdoor themed SYS 3 M112 Systainer.

Availability

This special Systainer is available for shipping beginning November 14, 2023. According to Senior Product Marketing Manager at Festool Rick Bush,

Our limited edition Outdoor Systainer is a new item for consumers who are ready to roam the outdoors and explore personal passions.

Festool Outdoor Systainer Specifications

• Hard Style Case
• Weight: 3Lbs
• Model Number 577712
• Depth: 16″
• Height: 12″
• Compatible with all Festool Systainers

Where to Buy The Festool Outdoor Systainer

For almost a century now, Festool has been creating power tool solutions that are sturdy, well-engineered, and inventive.  This special edition Systainer is lightweight and portable and slick looking.

For a limited time you can purchase this Outdoor Systainer (577712) for $99.00.

Festool Outdoor Systainer is a post from Tool Box Buzz

RYOBI 40v Cordless 4 Gallon Backpack Sprayer Kit – Model RY40301VNM

RYOBI 40V Backpack Sprayer

4/5

Manufacturer: RYOBI
Model number: RY40301
Price: $219.00
Power source: 40v
Weight: 13.8 Lbs

Get More Done in Less Time – No Need to Stop and Pump Up The Sprayer – Battery Powered Time Saver!

RYOBI continues to impress the Tool Box Buzz crew with its outdoor power equipment [OPE] lineup. From their 18v products, 40v line of OPE, and recently the 80v Zero-Turn Mower we just reviewed.

Out of the Box | Assembly

There were some assembly steps necessary when the RYOBI backpack sprayer was delivered. The spray wand needed to be put together and the 2.0Ah battery needed to be charged. The trigger handle, which was already connected to the hose, needed to be connected to the spray wand. You are now prepared to begin working after completing these two stages.

RYOBI 40V Backpack Sprayer

The RYOBI 40V Cordless Battery 4 Gal. Backpack Sprayer comes in a kit form (RY40301VNM) or as a bare-tool (RY40301BTL)

RYOBI MFG Specifications

• No pumping required
• Variable pressure dial 
• 4 nozzles
  – Adjustable
  – Flat Fan
  – Shower Head
  – Dual Head
• Translucent tank for easy fluid level reference
• Gravity-fed design – no wasted chemicals
• Comfortable backpack design with padded and adjustable shoulder straps

RY40301VNM Kit Components

• 40V Backpack Sprayer ( RY40301BTL )
• 40V 2.0Ah Battery (OP40204)
• Charger (OP404)
• 4 Nozzles
  – Adjustable
  – Flat Fan
  – Shower Head
  – Dual Head

Backpack Sprayer Tank |Features

Gravity Fed Tank Design

The gravity-fed tank’s design eliminates the problem of wasted fluid. On the right and left sides, fluid is pulled from the lowest position.

Fluid Level Indicators

There are two fluid level indicator scales on the tank. On the left side, there is a Gallon scale from 1-4.

The backpack sprayer also has a metric scale on the right side from 5, 10, and 15L markings. We felt that maybe highlighting the number would be easier on the eyes of the user and weren’t sure where exactly the line indicates the level.

Labor Free Benefits

As we mentioned before, one of the major benefits of cordless sprayers is the ability to avoid any manual hand-pumping.  Having to manually pump to build up the pressure to spray is time consuming, especially if you have a large amount of area to cover.

We find delight in preventing user fatigue while maintaining a good performance throughout your spraying job.

Speed Control Knob

On the lower left side of the cordless backpack sprayer, there is a speed control knob. You may adjust the speed for particular applications with the variable speed knob, which has a range of OFF to maximum PSI. Maximum speed enables 90 PSI of pressure, which quickly releases the substance.

Auto Lock Trigger

The RYOBI RY40301 has a yellow trigger lock switch located on the trigger handle allowing for a constant stream if desired. To activate what we would call “cruise control” pull the trigger lever and flip the yellow switch

To activate what we would call “cruise control” press the trigger lever and flip the yellow switch back. This will lock in the lever. Flip the lever back forward and it releases the lever and you are back to controlling the flow. 

Comfort Backpack Straps

There is a comfortable backpack design with padded and adjustable shoulder straps allowing you to spray around the yard comfortably. The straps have multiple points that you can adjust to achieve the most comfortable position for the user.

There is a middle chest buckle preventing the straps from falling off your shoulders.

Run-Time

RYOBI claims that you can spray 200 gallons per charge on a 2.0Ah battery. During our testing and evaluation, we flowed 50+ gallons of pesticide and herbicide. We also flowed roughly 20+ gallons of water through the tank just cleaning it out in between uses. We did not notice any decrease in power throughout our spraying and the indicator light on the battery was at 2 bars.

Think about the amount of pumping required for 200 one-gallon containers. Additionally, the time saved by using a 4-gallon tank rather than stopping to fill a 1-gallon container.

Overall Impressions

Whether you are a simple DIY homeowner or a professional landscaper, the RYOBI RY40301 Cordless Backpack Sprayer is one of those pieces of equipment that just makes sense to have. If you are on the RYOBI 40v platform then it is definitely worth the purchase. Sold in a kit for $219.00.

As general contractors, we receive requests for a wide variety of tasks. This RYOBI 40v 4-gallon cordless backpack sprayer will allow you to efficiently flow products, such as insecticides on the foundations of houses or herbicides to kill undesired vegetation.

With the RYOBI 40V 4 Gal. Cordless Backpack Sprayer, you can complete the task at hand without ever having to pump anything.

The Ryobi 40V Cordless Backpack Sprayer is a Great Addition To Anyone’s Yard Care Tool Collection

RYOBI 40V 40Gallon Backpack Sprayer Video Review

#HomeDepotPartner

#MyHomeDepot

RYOBI 40v Cordless 4 Gallon Backpack Sprayer Kit Review is a post from Tool Box Buzz